- ページ 13

リピーター Gainer GCPR-D10のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Gainer GCPR-D10 16 ページ。 Antenna built-in repeater

ページを印刷する

2.8、

Fix receiving antenna on window of glass or wall by double tape.

2.9、

After install, testing the communication quality by mobile phone.

2.10、

Only when the OP Alarm is red, the repeater won't be used, this moment

repeater will automatically shut down uplink and downlink amplifier and under power off

working state, so please shut down power supply. Adjusting the straight distance

between receiving antenna and repeater, repeaters position. After that the OP Alarm still

is red and not in working state, then need to send back factory to repair.

2.11、

Repeater has interference and protects circuit, but in any it doesn't interfere

BTS, the worst case is the repeater can't work. So as long as ensure receiving antenna

and repeaters isolation is proper, no need to do any adjustment, then it can up to cover

effect.

5、Indicator light

Power LED

AGC LED

ISO LED

LED

Instructions

OP LED

nstructions

Output

power

Website:

www.gainerchina.com

Tel: 86-755-86377306

Add: 86# Hou Ting Number Two Industrial District,Sha Jing,Bao An District, Shenzshen, China

Gainer International (China) Limited

Green on--normal ，DC Off-- Power supply faulty

AGC off—not start

AGC start control is more than 15-20dB(downlink signal

AGC Red on--

input is very strong.)

ISO off—Normal, Red on--

isolation for equipment installation, adjusting for donor antenna and

service antenna is needed.

Over power instructions: alarm to equipment output exceed the

maximum power output

1.Receiving signal below -77dBm, digital tube don't show it

2.Receiving signal range is -77 to -73dBm, digital tube show 1bar.

3.Receiving signal range is -72 to -68dBm, digital tube show 2bar.

4.Receiving signal range is -67 to -63dBm, digital tube show 3 bar.

5.Receiving signal range is -62 to -58dBm, digital tube show 4 bar.

6. Receiving signal range is -59 to -55dBm, digital tube show 5 bar.

第 13 页共 16 页

Antenna isolation is 15dB lower than the

http://www.signalrepeater.net

Email:

[email protected]