- ページ 7

エアコン Gree 13-04582のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Gree 13-04582 18 ページ。 3-in-1 mobile air conditioner

INSTALLATION BY WINDOW TYPE

Casement window

1. It is recommended to replace the

screen with a clear plexiglass

panel (1/4'') fitted to the size of

your window screen.

2. Cut a hole to the same size as the

window oval adaptor of the

exhaust hose - approximately

13,3 cm (5-1/4").

3. Correctly fit on the adaptor.

4. Fix it on the plexiglass using

4 screws (not included).

Sliding windows or patio door

1. Install the window slider kit

vertically or horizontally within the

inside frame (vertically for a patio

door). If necessary, screw the slider

kit on the frame.

2. Close the window onto the window

kit to form a tight seal.

3. Attach the exhaust hose adaptor to

the window slider kit; the adaptor

tabs will lock into place the

adaptor to the window kit.

• Make sure to correctly install and insulate the window slider kit. It must perfectly fit into

the window. The length can be adjusted. The three pieces are easy to cut and slide well

into each other.

• Tape the edge around the slider kit to stop insect or bug intrusion (tape not included).

NOTE :

Using the window slider kit may make it difficult to correctly close and/or lock the window.

Additional safety precautions should be considered.

INSTALLATION

HUNG

WINDOW

WINDOW or PATIO DOOR

Note : model may

differ from illustration

SLIDING

CASEMENT

WINDOW