- ページ 8

録音機器 Gainlab Audio GLA-TC2のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Gainlab Audio GLA-TC2 13 ページ。
Gainlab Audio GLA-TC2 にも：校正マニュアル (18 ページ)

INTERVENTION - THRESHOLD

if the instrument cluster mode

toggle switch is set to the up

position. In this case, the home

position of the instrument cluster is

at 0 and shows the degree of signal

level reduction to the left (in the

negative direction) per dBu unit.

A f t e r s w i t c h i n g b e t w e e n t h e

LOCOMP and HICOMP positions, it

may be necessary to readjust the threshold level and time constants.

Due to the nature of the equipment, the higher the gain reduction value, the higher

the compression ratio. To adjust the threshold level, turn the knob labeled

THRESHOLD clockwise to set the lower threshold level, or turn the knob

counterclockwise to set the higher threshold level.

CHANNEL LINK/UNLINK

The Dictator Dual Mono is set to A-B channel mode by default. In

such cases, the aim is for the right and left channels to run together

as much as possible. However, in certain situations, it may be

advantageous to eliminate the coexistence of the two channels. In this

case, it is possible to separate the auxiliary circuits of the device. To

separate the auxiliary circuits, move the switch right and check

on the lower indicator lights that the compressor is in the

desired operating condition. Move the switch left to return linked mode. 

DICTATOR DUAL MONO VARI-μ

The intervention threshold level, THRESHOLD,

determines the signal level at which the dynamics

controller starts compressing.

intervention can be manipulated by the operator by setting

the time constants discussed above, which has a

signiﬁcant inﬂuence on the nature of the sound. The

extent of the interference on the two VU meters can be

monitored

The timing of the