ページを印刷する
Important Safety Instructions
READ THIS SECTION BEFORE ATTEMPTING TO OPERATE AIR CONDITIONER.
Plug in &
press RESET
NOTE: Some plugs have
buttons on the top.
The power supply cord contains a current device that
senses damage to the power cord. To
test your power supply cord do the following:
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the
plug head. Press the TEST button.
You will notice a click as the RESET button pops out.
3. Press the RESET button. Again you will notice a click
as the button engages.
4. The power supply cord is now supplying electricity to
the unit. (On some products this is also indicated by a
light on the plug head).
NOTES:
• Do not use this device to turn the unit on or off.
• Always make sure the RESET button is pushed in for
correct operation.
• The power supply cord must be replaced if it fails to
reset when either the TEST button is pushed, or it
cannot be reset. A new one can be obtained from the
product manufacturer.
• If power supply cord is damaged, it CANNOT be
repaired. It MUST be replaced by one obtained from
the product manufacturer.
13