屋外ライト Gainsborough H580のPDF 使用方法をオンラインで閲覧またはダウンロードできます。Gainsborough H580 3 ページ。 Kissing fairy solar light

Kissing Fairy Solar Light

H580

v001: 15/02/21

Please read and retain these instructions for future reference

ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:

Unpack the components carefully. Please check all parts have been removed from the packaging.

Find an ideal Place for the Solar Light.

The solar panel is on the back of the product. The glass is inside the glass ball.

Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of

hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed

in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the

light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from

coming on, or cause it to turn off automatically

ON/OFF switch

NOTE: In order to verify that the button is correctly in the " ON " position, cover the solar panel with your

hand and light should turn "ON" automatically.

IMPORTANT:

Install the solar light in an area where it can get direct sunlight.

Leave the button to "ON" position.

Dimensions

(H) 20 x(W) 19 x(D) 14cm

Composition

Polyresin, plastic, glass

Solar light

1x Ni-MH AAA 300mAh 1.2V

1 x Warm White LED Lights (not replaceable)

CHARGING AND OPERATION:

1. Set button which is located underneath the solar panel to

"ON" position for charging and

charge by placing it under direct sunlight for at least 8

hours.

2. The light will work automatically. It will charge under direct

sunlight during the day time and illuminate at night.

ALWAYS POSITION IN DIRECT SUNLIGHT