- ページ 6

エアコン Gree AEH09AA-D3DNA1C/IのPDF インストレーション＆オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Gree AEH09AA-D3DNA1C/I 15 ページ。

ページを印刷する

How to use the remote control to operate the unit

ress this button to achieve the on and off of healthy and scavenging functions in operation status.

Press this button for the first time to start scavenging function;

LCD displays"

simultaneously; LCD displays"

and scavenging functions simultaneously. Press the button for the fourth time to start healthy

function; LCD display "

SLEEP:

Press this button, can select Sleep 1 (

●

circulate between these, after electrified, Sleep Cancel is defaulted.

Sleep 1 is Sleep mode 1, in Cool, Dehumidify modes: sleep status after run for one hour, the main

●

unit setting temperature will increase 1

setting temperature; In Heat mode: sleep status after run for one hour, the setting temperature will

decrease 1 ℃, 2 hours, setting temperature will decrease 2 ℃, then the unit will run at this setting

temperature.

Sleep 2 is sleep mode 2, that is air conditioner will run according to the presetting a group of sleep temperature curve.

●

Sleep 3- the sleep curve setting under Sleep mode by DIY:

●

(1) Under Sleep 3 mode, press "Turbo" button for a long time, remote control enters into user individuation sleep

setting status, at this time, the time of remote control will display "1 hour ", the setting temperature "88" will

display the corresponding temperature of last setting sleep curve and blink (The first entering will display

according to the initial curve setting value of original factory);

(2) Adjust "+" and "-" button, could change the corresponding setting temperature, after adjusted, press

"Trubo "button for confirmation;

(3) At this time, 1 hour will be automatically increased at the timer postion on the remote control, (that are

"2 hours " or "3 hours " or "8 hours "), the place of setting temperature "88" will display the

corresponding temperature of last setting sleep curve and blink;

(4) Repeat the above step (2) ～ (3) operation, until 8 hours temperature setting finished, sleep

curve setting finished, at this time, the remote control will resume the original timer display;

temperature display will resume to original setting temperature.

Sleep3- the sleep curve setting under SLEEP mode by DIY could be inquired:

The user could accord to sleep curve setting method to inquire the presetting sleep curve, enter into user

●

individuation sleep setting status, but do not change the temperature, press "Turbo" button directly for confirmation.

Note: In the above presetting or enquiry procedure, if continuously within10s, there is no button pressed, the

sleep curve setting within10s, there is no button pressed, the sleep curve setting status will be automatically

quit and resume to display the original displaying. In the presetting or enquiry procedure, press "ON/OFF"

button, "Mode" button, "Timer"button or "Sleep" button, the sleep curve setting or enquiry status will quit similarly.

TEMP:

Press this button, could select displaying the indoor setting temperature or indoor ambient

temperature.When the indoor unit firstly power on it will display the setting temperature,

if the temperature's displaying status is changed from other status to"

ambient temperature, 5s later or within 5s, it receives other remote control signal that will

return to display the setting temperature. if the users haven't set up the temperature

displaying status,that will display the setting temperature.

". Press the button for the second time to start healthy and scavenging functions

" and "

" . Press this button again to repeat the operation above.

℃,setting temperature increased 2℃, the unit will run at this

" . Press this button for the third time to quit healthy

), Sleep 2 (

),Sleep 3 (

OPERATION INSTRUCTIONS

) and cancel the Sleep,

",displays the