- ページ 6

望遠鏡 Celestron ASTROMASTER LT 70 AZのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Celestron ASTROMASTER LT 70 AZ 8 ページ。

ALIGNING THE

FINDERSCOPE

The finder is one of the most important parts of your telescope. It helps you

locate objects and center them in the eyepiece. The first time you assemble your

telescope, you need to align the finder to the telescope's main optics. It's best to

do this during the day*.

* SOLAR WARNING!

Never attempt to view the Sun through any telescope

without a proper solar filter

CHOOSE A TARGET

Take the telescope outside during the day and find an easily

recognizable object, like a streetlight, license plate or sign.

The object should be as far away as possible, but at least a

quarter mile away.

ADJUST THE FINDERSCOPE

Without moving the telescope,

adjustment knobs to move the finder around until the red

dot appears over the same object you are observing in the

telescope's 20 mm eyepiece.

Focus Knobs

CENTER THE TARGET

IN THE EYEPIECE

Look through the telescope using your lower powered

eyepiece. Move the telescope until the object you chose lies

in the center of the view. If the image is blurry, gently turn

the focus knobs until it comes into sharp focus.

YOUR FINDERSCOPE IS

NOW ALIGNED!

use the two

It should not require realignment unless it is bumped

or dropped.

Low Power Eyepiece

LOOK THROUGH FINDERSCOPE

Once the object is centered in your 20 mm eyepiece, look

through the finderscope and locate the red dot.