ホーム照明アクセサリー Gainsborough K274のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Gainsborough K274 3 ページ。 Solar butterfly mobile

Solar Butterfly Mobile

K274

v001: 11/01/21

Please read and retain these instructions for future reference

ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:

Unpack the components carefully. Please check all parts have been removed

from the packaging.

Before using first time

Allow lamp to charge for at least 8 hours in full sunlight with the ON/OFF

switch in the ON position. The ON/OFF switch is located under the solar panel.

Once the batteries are fully charged, set the ON/OFF switch to ON. If the lamp

does not turn on after dark refer to Maintenance section.

Find an ideal Place for the Solar Light.

Place the solar light in an area where it will receive direct sunlight for at least

8 hours per day. The number of hours the light will illuminate is directly

proportional to the hours of sunlight it receives. If the light is placed in a

shaded area, it will not be able to fully charge and its illumination time will be

limited. Do not place the light near other outdoor lighting like porch or

streetlights. These may fool the sensor and keep the light from coming on, or

cause it to turn off automatically

ALWAYS POSITION IN DIRECT SUNLIGHT

Dimensions

(H) 100 x (W) 15 x (D) 15cm

Material

Metal, Polystyrene

Battery

1 x AA 1.2V 300MAH NI-MH RECHARGABLE

•

PRETTY SOLAR BUTTERFLY MOBILE THAT WILL

DELICATELY 'DANCE' IN THE WIND

•

WITH 16 INTRICATELY CUT OUT BUTTERFLIES IN A

MIX OF COLOURS THAT CASCADE DOWN FROM THE

TOP OF THE MOBILE

•

SCATTERED WITH WARM WHITE LEDS (not

replaceable) POWERED BY THE BUILT IN SOLAR

PANEL AT NIGHT TIME IT LOOKS MAGICAL LIT UP

WITH THE BACKDROP OF A GARDEN

•

HANG FROM A TREE, HOOK, SIT BACK AND ENJOY!

•

100X15X15CM