- ページ 12

キーパッド Hiddn KryptoDisk 2のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Hiddn KryptoDisk 2 17 ページ。 Selfkey model
Hiddn KryptoDisk 2 にも：クイック・インストール・マニュアル (2 ページ), ユーザーマニュアル (16 ページ)

ページを印刷する

KRYPTODISK 2 |

USER PRIMARY AND DATA RESTORE CARD

Admin Battery Status

This displays the voltage (V) and charge (%) of the battery in the KryptoDisk 2.

Set Keep Alive

This allows you to activate and set the timer for keep alive mode. This mode allows you to establish a pre-set

timer that keeps the KryptoDisk 2 unlocked after the device is unplugged (the timer can be set to maximum

240 seconds). This can be useful if the KryptoDisk 2 is to be moved from one computer to another in a secure

environment. Keep alive has to be used if you are booting from the KryptoDisk 2 and the operating system cuts

power to the USB bus during start-up.

To activate this mode, enter the Admin menu. If the KryptoDisk 2 is connected to a computer, you will be

prompted to disconnect it. The display will reveal whether keep alive mode is currently active, where "0"

means inactive. Enter how long (in seconds) you want the device to be unlocked after unplugging. The "*"-key

functions as a backspace key. Press the "#"-key to save.

To disable the feature, enter "0" or simply delete the current setting and confirm.

NB: This functionality, while practical, can be a severe security liability if misused. If someone were to gain

access to your KryptoDisk 2 while it is open and connected, they can steal it, connect it to their own computer

and gain access to your data.

Only activate this feature if you are certain your environment is safe and that you understand the possible

ramifications.

9. Initialising and formatting the hard drive

Formatting a hard drive in Windows

NB: Formatting in Windows requires admin access.

1. Open Disk Management

Open the Disk Management tool. How to do this depends on your version of Windows, but usually you can

press the Windows key and type "Run" (consult Microsoft help pages to find the corresponding command if

you have a native language installation of Windows). In the resulting dialogue box, enter diskmgmt.msc

The disk management tool will open and you can start formatting the disk.

2. Initialise disk

Disk initialisation should appear automatically. If it doesn't, right-click on the icon and follow the instructions.