屋外用家具 Gainsborough Pk2 Solar Butterfly StakeのPDF 組み立て説明書をオンラインで閲覧またはダウンロードできます。Gainsborough Pk2 Solar Butterfly Stake 2 ページ。

Pk2 Solar Butterfly Stake

H305

v01: 13/11/20

Please read and retain these instructions for future reference

ALWAYS POSITION IN DIRECT SUNLIGHT FOR BEST CHARGING

Dimensions:

23 x 10 x 109cm

Stake – 0.8cmD x 55.5cmL



BREATHTAKINGLY COLOURFUL THESE BUTTERFLY STAKES

WILL REALLY BRING YOUR GARDEN TO LIFE



WITH DECORATIVE WINGS THAT ARE A MIX OF GLASS AND

METAL, BEADED BODY AND PRETTY LEAF DÉCOR ON THE

STAKES



GIVES A REAL BURST OF COLOUR AND AT NIGHT TIME

AUTOMATICALLY LIGHT UP TO GIVE A MAGICAL GLOW



PLACE ALONG A PATH, IN POTS OR AMONGST YOUR

FLOWERS BEDS



LEDs not replaceable

Battery: 1x Ni-MH AAA 300mAh 1.2V rechargeable battery

ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:

Unpack the components carefully. Please check all parts have been

removed from the packaging.

To easily insert stakes into the ground, it is recommended to wet

the ground first. To avoid damaging garden stakes when inserting

into the ground, select a spot in soft, rock-free soil. Insert the base

of the stake first then gently insert the rest of the stake into the

base. DO NOT push directly against the solar cell or the ornament

housing containing the actual LED light.

Before using first time

Allow lamp to charge for at least 8 hours in full sunlight with the

ON/OFF switch in the ON position. The ON/OFF switch is located

under the solar panel. Once the batteries are fully charged, set the

ON/OFF switch to ON. If the lamp does not turn on after dark refer

to Maintenance section.