- ページ 2

録音機器 80TAPE LIMBO III-COMPACTのPDF マニュアルをオンラインで閲覧またはダウンロードできます。80TAPE LIMBO III-COMPACT 3 ページ。

ページを印刷する

Setting the expression mode:

Hold the tap tempo switch for one second then turn

the M.Depth control a quarter turn in any direction.

Next, move the dial to the desired mode as shown on

the right release the tap tempo button when in place

to set. Hint: As there are no guides it can be easy to

select the wrong mode, sometimes it may take a

couple of attemps. Aim for the centre solid line to

ensure the correct setting is selected.

ARP Mode:

In this mode the M.DEPTH in conjunction with the mode number switch

selects which pitch shift setting is used (see table below for full details).

ARP mode is synced to the tempo, so either the tap tempo or manual

delay time control can be used to control it's frequency. To give further

tweakability the M.SPEED control acts as a tempo multiplier to give 4x, 3x,

2x and 1x the tempo speed (in clockwise direction, quarter turns). Mode 3

however is di erent and triggers with the tap tempo button.

Modulation Settings:

LFO - Modulates by LFO select between Sine, Square and Sawtooth modulation.

ENV - Changes in envelope directly control the modulation. Setting M.SPEED sets the attack response.

ARP - Pitch shifts repeats. See ARP section for more details.

LFO

ENV

ARP

Low Noise:

All analog delays exhibit noise at longer delay times. Here's some hints to reduce it:

- Avoid setting the tone control higher than 12 O'Clock. The lower the tone control is set the better

the S/N.

- Use as much of the headroom as possible. Avoid sending signals less than unity gain (unless you have

very hot pickups).

- Brighter input signals will have a better S/N. (You can always lter on the amp side.)

1) SINE WAVE

2) SAWTOOTH

3) SQUARE WAVE

1) HEAVY ENVELOPE

2) NORMAL

3) NORMAL INVERTED

1) A: Octave down B: Octave up C: 5th up D: 5th down

2) A: Special down B: Special up C: 2 Octaves down D: 2 Octaves up

3) MODE1 but with manual trigger via tap tempo

M.Depth

M.Speed

Regen

M.DEPTH

Delay Time

Direct Control Modulation

M.DEPTH