- ページ 8

I/Oシステム AutomationDirect Productivity2000 P2-8AD4DA-2のPDF マニュアルをオンラインで閲覧またはダウンロードできます。AutomationDirect Productivity2000 P2-8AD4DA-2 8 ページ。

ページを印刷する

WARNING:

To minimize the risk of potential safety problems, you should follow all
applicable local and national codes that regulate the installation and operation of
your equipment. These codes vary from area to area and it is your responsibility
to determine which codes should be followed, and to verify that the equipment, in-
stallation, and operation are in compliance with the latest revision of these codes.
Equipment damage or serious injury to personnel can result from the failure to
follow all applicable codes and standards. We do not guarantee the products
described in this publication are suitable for your particular application, nor do
we assume any responsibility for your product design, installation, or operation.
If you have any questions concerning the installation or operation of this equip-
ment, or if you need additional information, please call Technical Support at
770-844-4200.
This publication is based on information that was available at the time it was
printed. At AutomationDirect.com
®
and services, so we reserve the right to make changes to the products and/or
publications at any time without notice and without any obligation. This publication
may also discuss features that may not be available in certain revisions of the
product.

Removable Terminal Block Specifications

Part Number
P2-RTB
Number of
18 Screw Terminals
positions
30–16 AWG (0.051–1.31 mm²)
Solid / Stranded Conductor
Wire Range
3/64 in. (1.2 mm) Insulation Maximum
1/4 in (6–7 mm) Strip Length
Conductors
"USE COPPER CONDUCTORS, 75ºC" or equivalent.
Screw Driver
Width
Screw Size
M2
Screw Torque
2.5 lb·in (0.28 N·m)
*Recommended Screwdriver TW-SD-MSL-1
8
www.productivity2000.com
we constantly strive to improve our products
P2-RTB-1
18 Spring Clamp Terminals
28–16 AWG (0.081–1.31 mm²)
Solid / Stranded Conductor
3/64 in (1.2 mm) Insulation Maximum
19/64 in (7–8 mm) Strip Length
0.1 in (2.5 mm) Maximum*
N/A
N/A
Document Name
Edition/Revision
P2-8AD4DA-2-DS
2nd Ed.
Copyright 2014, AutomationDirect.com Incorporated/All Rights Reserved Worldwide
Tech Support 770-844-4200
Date
8/20/2019