- ページ 2

室内装飾品 Hideaway Soft Close SeriesのPDF メンテナンス方法をオンラインで閲覧またはダウンロードできます。Hideaway Soft Close Series 2 ページ。 Bin

ページを印刷する

Push firmly on the back of the unit to ensure the

lid clears the hooks located on the right and left

hand sides of top mounting panel

Hook

Front lid support

The unit should look like this with the friction-

fitted lid removed (Soft Close model shown

with door bracket removed for illustration).

Replacement parts and compostable bin liners for your Hideaway Bin can also

be purchased via our website!

Questions? See the FAQ section of our website

NEW ZEALAND

09 426 7456 / [email protected] / www.hideawaybins.co.nz

AUSTRALIA

1800 042 642 / [email protected] / www.hideawaybins.com.au

How to remove the friction-fitted lid from a Deluxe

or Soft Close Bin (for cleaning)

NOTE: Compact Bin models DO NOT have

removable lids.

• If you have a Deluxe model: Remove and separate the runners as

explained in the above instructions.

• If you have a Soft Close model: remove the buckets from your unit. The

runners on the Soft Close range do not seperate.

• Both ranges: you need to clear the hooks at the back of the lid. Place

your hand at the back of the lid and then push up and pull forward in the

same motion. This will release the lid. Remove the lid clear of the main

unit. This will then allow you to clean the lid.

How to reinstall the friction-fitted lid into your

Deluxe or Soft Close Bin

• Rest the foam on top of the friction-fitted lid. NOTE: the plastic sleeve

stays on the foam to protect it.

• Slide the friction-fitted lid and foam inside the top mounting panel,

stopping just before the rear hooks. NOTE: the large fold on the friction-

fitted lid sits at the front of the unit, the rear of the lid has the slots which

reconnect with the hooks located on the top mounting panel.

• Check that the foam is behind the front lid support.

• Simultaneously, with one hand, push firmly up on the back of the

friction-fitted lid, push the lid above the hooks and drop into location.

Whilst this is happening, with the other hand push the front of the lid

upwards to ensure it rests on the front lid support - located at the front of

the top mounting panel.

• The lid should move up and down a small amount, with ease indicating

correct installation.

•

If you have a Deluxe model:

Lid coming free

above instructions.

of hook

reattach the runners as explained in the