- ページ 9

室内装飾品 Hideaway Beds CEVNTのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Hideaway Beds CEVNT 10 ページ。 Bed

Complete Assembly (fig 3)

6. Place the bolts into the holes at the head end of the bed frame. Lift the bed frame into position,

lining the bolts up with holes of the counterbalanced units. ('E'&'F' in Fig 1) and securing by

tightening the nuts.

7. Join together the two halves of the automatic leg

bar 'K'& 'L' then attach the end with the smaller

hole to leg 'M' (Fig 3).

8. Attach the end with the bigger hole to the lug on

frame 'H' (Fig 1) using the washer and split pin.

(Fig 3)

9. Screw pull handle 'N' to the crossbar of the legs

(Fig 3). Place the assembled bed and sub-frame

in the preferred position in the room and mark

out the holes to be drilled in the wall and floor.

Fix as appropriate. NOTE: IT IS ESSENTIAL THAT

THE BED ASSEMBLY IS SECURELY FIXED TO FLOOR

AND

WALL

WITH

SUPPLIED).

10. Fix the sub-frame securely to the wall using the

correct fixings to suit the wall and floor material.

11. With the bed in the horizontal position, place the

mattress onto the frame and secure with bedding

straps. N.B. without the weight of the mattress

the bed will try to return to its upright position,

so it is suggested to have someone assist you by

holding the bed whilst you put the mattress on.

CORRECT

FIXINGS

(NOT

9 |

P a g e