- ページ 5
ウェザーステーション Hideki TE 529ELのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Hideki TE 529EL 11 ページ。 Weather station hideki te 529el
ページを印刷するbutton for 2 sec. To enforce another search whereby the main unit and remote sensor will again
be synchronized.
Indoor and Outdoor Temperatures
The outdoor temperature appears in the middle of the LC display an in the lower part the indoor
temperature is shown. If the transmission from the remote sensor to the main unit is interrupted
for more than 2 minutes" --,-" begins to blink in the display. When this occurs check the remote
sensor. You may wait until the radio signal is transmitted again or press
main unit and remote sensor will again be synchronized.
Indoor and Outdoor Humidity
Along with the teperature the humidity is shown on the LC display in %. On the lower line you will
fid the indoor values and on the upper the outdoor values. Data is transferred simultaneously
from the remote sensor for both outdoor humidity and temperature. When the transmission is
interrupted, " --,-" appears in the humidity field of the display.
Interrupted Radio Signal Transmission
If the main unit does not register signals from the sensor , " --,-" will appear in the display of the
main unit. In this case press
sensor. If this fails please check the following:
1.
The remote unit is still in place.
2.
The batteries of both the remote unit and main unit. Replace if necessary.
Note: When the temperature falls below freezing point, the batteries of outdoor units cannot
support a sufficient voltage. The effective range can lower to a few meters.
3.
The transmission is within range and path is clear of obstacles and interference. Shorten the
distance when necessary.
4.
Signals from other household devices such as computers, TV, security systems, mobile
phones etc. may interfere with the radio signals of this unit. If necessary, please relocate
weather station and sensor(s).
Status of the Signal Transmission
3 possible forms of transmission can be shown in LC display of themain unit:
The unit is in searching mode
Temperature readings are securely registered
No signals
Maximum and Minimum Temperature and Humidity
The weather station automatically stores the respective maximum and minimum values for
temperature and humidity for indoors and outdoors. To display these values press the MEM button:
•
Press once for display of minimum values for temperature and humidity stored since the last
clearing of the memory. The display will indicate MIN.
•
By pressing the MEM button a second time the maximum values for temperature and humidity will
be displayed. The display will indicate MAX.
•
By pressing the MEM button for 2 seconds stored values will be erased. The automatically storing
of minimum and maximum values begins anew.
The minimum and maximum values of the selected remote sensor (1,2, or 3) are also displyed by
pressing the MEM button. Each channel must be cleared separately.
Trend Display for
The LC display of the main unit has four trend indicators, which depict the tendence the temperature
and humidity will be changing.
•
Trend arrow for indoor temperature
•
Trend arrow for outdoor temperature
button for 2 sec. to synchronize the main unit with theremote
Temperature and Humidity
button for 2 sec.. The