- ページ 5
ストレージ 8BitMods MemCard PROのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。8BitMods MemCard PRO 15 ページ。
ページを印刷する
Basic usage
1.
Plug your card in to Slot 1 or Slot 2 of your PlayStation, PSone
or PlayStation 2 console.
2.
Power up your console. The logos "8BITMODS.COM" and
"MemCard PRO" will appear on the OLED display in this order.
3.
MemCard PRO will then load a VMC and display its name on
the display. The first time you power up the card,
"MemoryCard1" will be created on your microSD card, and will
be loaded and displayed on the MemCard PRO OLED display
(see fig. 1).
4.
As soon as your game launches, it will detect the Memory Card.
In-game usage is the same as a normal Memory Card, which
means you can save and load games as you'd normally do.
5.
Each Virtual Memory Card provides 8 channels of extra virtual
cards. You can think of each channel as an extra whole memory
card that you can use in your games. Each channel will provide
storage for 15 blocks.
6.
You can switch channels in many different ways. Most games
support memory card hot-swapping, and MemCard PRO
simulates the hot-swapping action every time you change a
Channel or VMC.
7.
To go to the next channel, you can press the right physical
button on the MemCard PRO. Other ways to go to the next
channel are:
Fig. 1: The display after booting for the first time, showing the VMC name at
the top-left, the current Channel at the bottom-right and the read and write
1.
Through the game pad with the following combo:
L1 + R1 + Select + D-Pad Right
2.
Through the WebUI on the Home page.
8.
To go to the previous channel, you can press the left physical
button on the MemCard PRO. Other ways to go to the previous
channel are:
1.
Through the game pad with the following combo:
L1 + R1 + Select + D-Pad Left
2.
Through the WebUI on the Home Page.
9. In order to create and select a new VMC with 8 more channels,
press the following combination on your game pad:
L1 + R1 + Select + D-Pad Up
The card will switch to "MemoryCard2" and Channel 1. If the
files for MemoryCard2 don't exist on the microSD card, they will
be automatically created. If they already exist, MemCard PRO
will mount that card instead. Pressing the same combination
again, will go or create "MemoryCard3" and so on.
Page 5
indicators.