- ページ 14

高圧洗浄機 ActiveProducts 1450のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ActiveProducts 1450 17 ページ。 Electric

USER MAINTENANCE

Connections

Connections on pressure washer hoses, gun and spray wand should be cleaned regularly and lubricated with

non-water soluable grease.

Fig.13

Adjustable Nozzle

When the nozzle is clogged, it will cause the pump

to build pressure and may cause the unit to surge.

You can clean the nozzle by carefully inserting a

thin, sharp instrument (i.e. paperclip) into the tip to

rid it of deposits.

For the adjustable nozzle, you can also lubricate the

nozzle collar (high-pressure/low-pressure) by

using non-water soluble grease regularly.

Water Filter Screen

The pressure washer is equipped with a water inlet

filter that prevents debris going into the pump. If the

filter is not kept clean, the flow of water to the

pressure washer will be restricted and the pump may

be damaged.

To clean inner water screen, remove quick-

connector and remove the filter screen from the

pump inlet (Fig.12).

Rinse screen until it is free of debris and

blockage.

Replace screen and quick-connector immediately

to prevent any foreign matter from entering the

pump.

Air Vents

The air vents located on the sides of the pressure

washer must be kept clean and free of any obstruc-

tions to ensure proper air-cooling of the motor during

operation.

Fig.14