- ページ 4
I/Oシステム Automationdirect.com Productivity 1000 P1-16ND3のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Automationdirect.com Productivity 1000 P1-16ND3 4 ページ。 Fast response dc input
ページを印刷する
WARNING:
To minimize the risk of potential safety problems, you should
follow all applicable local and national codes that regulate the installation
and operation of your equipment. These codes vary from area to area and
it is your responsibility to determine which codes should be followed, and
to verify that the equipment, installation, and operation are in compliance
with the latest revision of these codes.
Equipment damage or serious injury to personnel can result from
the failure to follow all applicable codes and standards. We do not
guarantee the products described in this publication are suitable for
your particular application, nor do we assume any responsibility for your
product design, installation, or operation.
If you have any questions concerning the installation or operation of
this equipment, or if you need additional information, please call Technical
Support at 770-844-4200.
This publication is based on information that was available at the time
it was printed. At AutomationDirect.com
our products and services, so we reserve the right to make changes to
the products and/or publications at any time without notice and without
any obligation. This publication may also discuss features that may not be
available in certain revisions of the product.
Terminal Block Specifications
Part Number
P2-RTB
Positions
18 Screw Terminals
30–16 AWG (0.051–1.31 mm²)
Solid / Stranded Conductor
Wire Range
3/64 in (1.2 mm) Insulation Max.
1/4 in (6–7 mm) Strip Length
Conductors
"USE COPPER CONDUCTORS, 75ºC" or equivalent.
Screw Driver
Screw Size
M2
Screw Torque
2.5 lb·in (0.28 N·m)
*Recommended Screw Driver TW-SD-MSL-1
4
www.productivity1000.com
we constantly strive to improve
®
P2-RTB-1
18 Spring Clamp Terminals
28–16 AWG (0.081–1.31 mm²)
Solid / Stranded Conductor
3/64 in (1.2 mm) Insulation Max.
19/64 in (7–8 mm) Strip Length
0.1 in (2.5 mm) Maximum*
N/A
N/A
General Specifications
Surrounding Air
0° to 60°C (32° to 140°F)
Temperature
Storage Temperature
-20° to 70°C (-4° to 158°F)
Humidity
5 to 95% (non-condensing)
Environmental Air
No corrosive gases permitted
Vibration
IEC60068-2-6 (Test Fc)
Shock
IEC60068-2-27 (Test Ea)
Field to Logic Side
1800VAC applied for 1 second
Isolation
Insulation Resistance
>10M: @ 500VDC
Heat Dissipation
3500mW
Enclosure Type
Open Equipment
Module Location
Any I/O position in a Productivity1000 System.
Use ZIPLink Wiring System or removable terminal block
Field Wiring
(Sold Separately). See "Wiring Options" on page 3.
See the "EU Directive" topic in the Productivity Suite Help
EU Directive
File. Information can also be obtained at:
www.productivity1000.com
Terminal Type
18-Position Removable Terminal Block
(sold separately)
Weight
71g (2.5oz)
UL 61010-1 and UL 61010-2-201 File E139594, Canada
& USA
Agency Approvals
CE (EN 61131-2 EMC, EN 61010-1 and EN 61010-2-201
Safety)*
*See CE Declaration of Conformance for details.
Document Name
P1-16ND3-DS
Copyright 2018, AutomationDirect.com Incorporated/All Rights Reserved Worldwide
Tech Support 770-844-4200
Edition/Revision
Date
2nd Edition
9/17/2019