- ページ 9

フィットネス・トラッカー Gait up Gait UpのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Gait up Gait Up 17 ページ。

Gait Up SA

EPFL Innovation Park, Bat C. CH-1015 Lausanne

www.gaitup.com

TVA CHE-145.136.760

Under "Output" you can choose from different result files you want to obtain (PDF, Excel file,

csv file). The PDF report provides an easily-readable report including benchmark color-

codes for some of the parameters and statistics for all parameters. The Excel report includes

cycle-by-cycle data, allowing to dig deeper into the data behind the statistics. The csv result

file is useful if you want to calculate your own statistics from the cycle-by-cycle values using

a third party software.

To generate these reports, select your files (saved before on your computer in the same

folder). You can drag and drop your files on the main page (both files at the same time). If

you select the files with the button "Select" use "CTRL" to take the two files [LF and RF].

NOTE: You can also analyse 1 foot, however some parameters will not be calculated

4.2.2 Select a period for the analysis

You can choose between a manual or automatic analysis. Manual analysis allows to select

a specific period for calibration and analysis. Automatic analysis takes the entire signal.

NOTE: If you choose automatic analysis, the following instructions are not necessary

and you can directly click on "Analyse" to obtain your reports.

If the manual analysis has been selected please read the following instructions carefully.

For sensors calibration, move the gray window to have a part of static period (at least 2

seconds) and some running or gait cycles (see picture below). To move the window, click

and drag the top bar. You can also expand the period by holding and moving the triangle on

each extremity of the selection window. It is possible to zoom in on the data. Once this step

finished click on "Next".

User guide GaitUp Lab - v1.0.0 Date: 04.05.2020