- ページ 7

エアクリーナー Airdog X3 KJ200F-X3のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Airdog X3 KJ200F-X3 7 ページ。

Q7: I heard a "cracking" or "zapping" noise inside the unit. Is that normal?

The occasional "zapping" or "cracking" is normal when the bigger particles enter the air puriﬁer, being zapped by the high

voltage, similar to when a bug zapper traps a bug. However, if the "cracking" or "zapping" noise is constant, you should

clean the unit and make sure that all parts in the unit are fully dried after you clean the unit. 80% of the noise issues are

caused by dust accumulation on the collecting plates and/or inner chamber, or by wet collecting plates. Normally a full

clean cycle will take care of this all.

Q8: When should I do a full cleaning cycle?

A.When "-C-" is on the display screen.

B."9XX" appears on the display screen even after cleaning the collecting plates.

C.Cracking sounds still exist after cleaning the collecting plates.

D.The unit shuts down and restarts automatically.

Note: Please refer to the "Full cleaning cycle" section in the user manual for details.

Q9: Can I clean Airdog X3 by putting the whole unit in the dishwasher?

You should not put the whole Airdog X3 unit into the dishwasher! Only the collecting plates is OK to be washed by a full

wash cycle. Please make sure the collecting plates unit is fully dried before putting it back into your Airdog X3. There could

be water residue inside of the collecting plates even after the drying cycle sometimes, so make sure to take the time to fully

dry them.

Q10: How could I conﬁrm that the collecting plates is fully dried?

Please put the collecting plates in a dry space for at least 24 hrs. You may put tissues or a paper towel under the collecting

plates to check if it is fully dried.

Q11: Why does Airdog App connection fail?

A.Airdog App does not support IPv6 network environment.

B.Make sure your Wi-Fi is in 2.4GHz.

C.The home Wi-Fi environment could be complicated. To verify if the smart control system is functional or not, you could

use the hotspot on another phone instead of the home Wi-Fi to make a connection. The hotspot could simplify connection

complexity and verify the hardware function.

D.We have ﬁnished the App and server migration. Please double check the label on the back of the unit, if it is a green

matrix code, you are good to download the "Airdog Pro"App and connect. If it is a blue matrix code, please check whether

your ﬁrmware is upgraded or not.

For more details, please visit the Ofﬁcial Website for the App Guide.

KJ200F-X3

Applicable area (m

)

(mm)

520

260