- ページ 6
エアクリーナー Airdog X5のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Airdog X5 8 ページ。
Airdog X5 にも: マニュアル (18 ページ), ユーザーマニュアル (8 ページ)
Full Cleaning Cycle
1. We recommend a complete cleaning every 6-12 months.
2. First, unplug the power supply. Open the back shroud, pull out the
ionization wire frame and collecting plates. Pull out the protective
rubber sleeve as illustrated in (Pic 1).
3. Clean the ionization wire frame and collecting plates properly
according to the previous instructions.
4. Use a wet cloth to wipe down all surfaces of the protective rubber
sleeve, including notches. For better result, wash the entire rubber
sleeve in water.
5. Clean the inner walls of the air purifier with a wet cloth.
6. Wash the pre-filter in water, or clean it by vacuum.
7. Dry the parts completely, then put them back in order.
Catalytic Gauze Cleaning
The composite filter is composed of a composite catalyst, and active carbon . In
principle the catalyst is not involved in the reaction and should not be changed.
However, if the catalyst becomes coated with dust, odor or moisture then the catalytic
effect will decrease. Protect the device with the provided cover whenever it is not
powered up to help extend the catalyst life. A periodic sunbath for 1-2 hour may also
help to reduce the moisture build up and reactivate the catalytic effect.
The shelf life of the composite filter depends on how much you use the purifier.
Change the composite every year or two, or whenever you notice a significant
decrease in the purifier's ability to remove odors from the air.
Note:
Please make sure the power has been cut off before any cleaning and maintenance
9
Pic 1
Pic 2
Pic 1
App Setting
Please keep your Wi-Fi on to help you finish your App setting.
iOS
Scan to download
Open App
Use email address to set up an account
Click "+" on top right corner
Press "WiFi" button on remote
Start to pair
Done
For convenience,
please check Airdog youtube channel for video instructions.
Android
Scan to download
Select model
Enter WiFi name & password
If failed, please keep the device live for
at least 5 minute, and try again
10