- ページ 14

アクセサリー Celestron Hand ControlのPDF 補足マニュアルをオンラインで閲覧またはダウンロードできます。Celestron Hand Control 17 ページ。 Cge series telescopes

ページを印刷する

Polar Align

Display Align

xes. These values can assist you in knowing the amount and direction of your error when polar aligning.

Align Mount

increased tracking precision and astrophotography. After performing a two star alignment, the telescope

will slew to where Polaris should be. By using the equatorial head to center Polaris in the eyepiece, the

mount will then be pointed towards the actual North Celestial Pole. Once Polar Align is complete, you

must re-align your telescope again using

e mount in the Northern Hemisphere:

With the telescope s

lignment method.

elect Polar Align from the Utilities menu and press Enter.

Based on your current alignment, the telescope will slew to where it thinks Polaris should be. Use the

equatorial head latitude and azimuth adjustments to place Polaris in the center of the eyepiece. Do not

use the direction buttons to position Polaris. Once Polaris is centere

polar axis should then be pointed towards the North Celestial Pole.

Light Control

e to conserve power and to help preserve your night vision.

Factory Settings

compensation values, initial date and time, longitude/latitude along with slew and filter limits

and control will ask you to press the "0" key before returning to the factory default setting.

Version

- Selecting this option will allow you to see the current version number of the hand control and

motor control software. The numbers indicate the hand control software version. For the motor control, the

and control will display two sets of numbers; the first numbers are for R.A and the second set are for DEC.

et Axis Positions

oto Axis Positions

Hibernate

- Hibernate allows the telescope to be completely powered down and still retain its alignment

when turned back on. This not only saves power, but is ideal for those that have their telescopes permanently

mounte

d or leave their telescope in one location for long periods of time. To place your telescope in Hibernate

mode:

1. Select Hibernate from the Utility Menu.

2. Move the telescope to a desired position and press ENTER.

3. Power off the telescope. Remember to never move your telescope manually while in Hibernate mo

Once the telescope is powered on again the display will read Wake Up. After pressing Enter you have the

option of scroll

e telescope.

Pressing UNDO at the Wake Up screen allows you to explore many of the features of the hand control without

waking the telescope up from hibernate mode. To wake up the telescope after UNDO has been pressed, sele

Hibernate from the Utility

hile in hibernate mode.

un Menu

For safety purposes the Sun will not be displayed as a database object unless it is first enabled. The enable the Sun, go to th

Sun Menu and press ENTER. The Sun will now be displayed in the Planets catalog as can be used as an alignment obje

when using the Solar System Alignment method. To remove the Sun from

lect the Sun Menu from the Utilities Menu and press ENTER.

–

the user can now display the polar alignment error in both the Azimuth and Altitude

The CGE has a polar alignment function that will help you polar align your telescope for

et up and roughly positioned towards Polaris, align the mount using the Two- Star

– This feature allows you to turn off both the re

– Returns the CGE hand control to its original factory settings. Parameters such as backlash

- Displays the relative altitude and azimuth for the current position of the telescope.

- Allows you to enter a specific relative altitude and azimuth position and slew to it.

ing through the time/site information to confirm the current setting. Press ENTER to wake up

menu and press ENTER. Do not use the direction buttons to move the telescope

any of the alignment methods described earlier. To polar align

d key pad light and LCD display for daytime

displaying on the hand control, once again

d in the eyepiece press ENTER; the

will be reset. The

de.