- ページ 9

アクセサリー Celestron StarSense AutoAlignのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Celestron StarSense AutoAlign 15 ページ。

ページを印刷する

SYNC

Syncing on a star will shift the mount model to the

star position . It will improve GoTo pointing in the

region of sky close to the star you synced on . Sync

can also be used if the mount was bumped or the

clutches were loosened for either axis . Sync will

restore the position of the StarSense GoTo without

using the camera .

1. With a named star selected, press OPTION and

ALIGN simultaneously .

2. Coarse center the star in your fi nder or eyepiece

and press ENTER .

3. Fine center the star in your eyepiece, fi nishing

in the UP and RIGHT directions and press

ALIGN .

POLAR ALIGN

This feature aligns the mount through the hand

controller, using any of the named stars in its

database, essentially eliminating the need for a

polar axis fi nder . Polar Align is use for Equatorial

mounts, or wedge-mounted Altazimuth mounts

only . Polar Align must be performed after a

StarSense Auto or StarSense Manual Align . We

recommend you also add multiple Cal Reference

points to improve the mount model, thereby

improving the polar alignment when adjustments

are made to the mount .

1. After your mount's GoTo is aligned, Press

ALIGN, scroll UP/DOWN, and select Polar

Align and press ENTER .

2. The screen will display the polar alignment

error of your mount . Press ENTER and select a

named star from the list, then press ENTER to

slew to that star .

3. The controller will prompt you to add a Cal

Star to improve the accuracy, or you may press

BACK to skip this step .

4. Adjust the mount by physically moving the alt-az

adjustments . The direction buttons are locked

out at this time to prevent accidentally moving

the motors in the mount .

5. Press ENTER to complete the polar alignment .

For best accuracy, perform another StarSense

Auto alignment .

STARSENSE OVERVIEW

STARSENSE CAMERA

USB Port for future upgrades

Lens shroud

and development

Modular Jack

Connection to mount

Camera Lens

Large Bracket

(pre-installed on

camera in box)

Attachment Screws

Modular Jack: Connects the StarSense Camera

to your telescope using the provided cable .

USB Port: Available for future software development

and camera fi rmware upgrades .

Camera Lens: A fully multi-coated 20mm f/2

lens responsible for capturing images to align

the telescope .

1. Liquid Crystal Display (LCD) Window:

Lens Shroud: Helps protect the lens from dew

Features a four-line, 18-character display screen

and peripheral light .

that has red backlighting for comfortable viewing .

Large Camera Bracket: This bracket is preinstalled

2 . ALIGN: Instructs StarSense to begin alignment

in the box with StarSense . The bracket can be

of your telescope .

removed and swapped with the smaller included

3. Direction Buttons: Used to manually slew your

bracket (see Assembly, Changing Brackets) .

telescope in any direction and center objects in

Camera Bracket Attachment Thumbscrews:

the eyepiece .

Used with the large camera bracket .

4. Catalog Buttons: StarSense has a key on the

STARSENSE HAND CONTROL

hand control to allow direct access to each of

the main catalogs in its 40,000+ object database .

StarSense AutoAlign's hand control gives you

StarSense contains the following catalogs in its

instant access to the night sky . With automatic

database: Solar System, Stars, and Deep Sky .

slewing to over 40,000 objects and common sense

menu descriptions, even a beginner can master its

5. IDENTIFY: Searches StarSense's databases

features in just a few observing sessions . Below is

and displays the name and offset distances to

a brief description of the individual components of

the nearest matching objects .

the StarSense hand control: