- ページ 8

バスルーム設備 GALA mittaのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。GALA mitta 12 ページ。 Hydromassage bathtubs
GALA mitta にも：ユーザーマニュアル (16 ページ), インストレーション・マニュアル (12 ページ), ユーザーマニュアル (16 ページ), 取付説明書 (12 ページ)

Installation manual

3. The motor access hatch must be at

least 70 x 45 cm. minimum, so that tools

will be required to open it (Fig. 2).

4.The grille on the access hatch must be

at least 200 cm in size. It will have

openings that prevent the penetration of

a rod with a diameter of 8 mm (Fig. 2).

2- SKIRTING

Installation with with skirting is described in the INSTALLATION INSTRUCTIONS, which are enclosed

with the bath.

This system avoids the need to provide an access hatch and ventilation grille. Access to the

hydromassage bath equipment for maintenance purposes is achieved by removing the skirting, and

ventilation is provided through the gap between the skirting and the floor. Under no circumstances

should this gap be sealed

The bath skirt will always be firmly fitted, requiring a tool for its removal. This tool should only be handled

by qualified personnel (corresponding Technical Assistance Service).

PLUMBING INSTALLATION

1. The plumbing installation must comply with the corresponding regulations applicable in each

country.

2. For the installation of taps, please consult the INSTALLATION INSTRUCTIONS corresponding to

each bath, which advise on how best to position them.

3 .The automatic plug must be connected to the effusion system by means of an elastic joint.