アダプター Celestron 81035のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Celestron 81035 2 ページ。 Smartphone adapter

USING YOUR

SMARTPHONE ADAPTER

(D)

1. Before attaching the adapter, look through your optic (telescope, spotting scope,

binocular, etc.) and make sure that the view is in sharp focus.

2. Open the eyepiece clamp (B) by loosening the eyepiece clamp knob (A) at the

top of the eyepiece clamp.

3. Place the eyepiece clamp over the eyepiece of your optic. Tighten the eyepiece

clamp knob to secure the eyepiece clamp tightly against the eyepiece.

NOTE:

Make sure to mount the clamp on a section of the eyepiece barrel that does not rotate freely,

such as an eye relief adjuster.

4. Loosen the holder clamp knob (D) until the holder clamp (C) is open wide

enough to accommodate the width of your phone. Once the phone is in place,

tighten the holder clamp knob until the phone is secured.

NOTE:

This adapter can be used with most phone cases, but the case surface MUST be flat so it will fit in the

holder correctly. Any grips, stands, rings, or raised surfaces on the case will impede the placement

of the phone. All folio-style phone cases must be removed.

(A)

(B)

(C)

Model #81035

(E)