- ページ 4

水中照明 Hidrotermal HIDRO-SW200のPDF インストレーション＆メンテナンス・マニュアルをオンラインで閲覧またはダウンロードできます。Hidrotermal HIDRO-SW200 4 ページ。 Wall mounted underwater light

ページを印刷する

3. RGB Light Color Control Operation

16 pre-programmed color modes of RGB light:

BLUE: static blue

GREEN: static green

BG: static cyan-blue

RGB: static white

R-RG-G slow animation

B-BR-R slow animation

R-G-B fast animation

G-RB-B-R-RGB-GB-RG

Remark: When the lights without internal controller option,

the light programs will keep changing by fixed automatic cycle switch.

RGB Operation:

1. Any of the 16 modes can be selected with the ON/OFF switch of your pool lights.

2. Turn the light ON.

3. The 16 color modes will begin to run automatically.

4. To change the color, turn the light OFF and then ON within 15 seconds. Continue turning

OFF and ON until the desired light color mode is reached. When the light is turned OFF for

more than 1.5 seconds, it will return to the beginning of the color cycle (mode 0).

Remote Controller Options: There are 3 optional control ways

1) Power switch control, 2) Remote control (Hidro-CTRL), 3) synchrostep remote control

The color modes can also be selected with the controller. One remote control device can

be adapted to 30 pool lights simultaneously within 100 meters.

If the light is used with Direct Current (DC), a DMX 512 control and WIFI control is

available.

4. Maintenance and Replacement

1. There is no maintenance required for this light. It is designed to be used only once,

meaning that replacement is necessary if it becomes defective. The repairing is impossible.

2. Before servicing the light, always disconnect the power of the circuit breaker. Make sure

there is NO power supplied to the light.

3. To replace the light, unfasten it from the bracket. Make sure the new light is the same

switch.

5. Warranty

1. The manufacturer warrants this led underwater light against defect in materials and

workmanship for a period of two (2) years from the date of purchase.

2. This warranty is limited to the first retail purchaser, it is not transferable, and does not

apply to products that have been moved from their original installation sites. This warranty

does not cover failures or malfunctions from improper installation and/or operation.

3. The manufacturer is not responsible in any circumstances for assembly, installation or

start-up of any electric components which have been inserted or handled at locations other

than its own premises.

4. The liability of the manufacturer shall not exceed the repair or replacement of defective

parts. It specifically excludes liability for direct, incidental or consequential damages.

RED: static red

RB: static purple

RG: static yellow

RGB change gradually to G/R/B

G-GB-B slow animation

RG-GB-BR slow animation

R-B-G fast animation

R-G-B slow animation