- ページ 3
デジタルカメラ Celestron Skyris 132MのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Celestron Skyris 132M 9 ページ。 Usb 3.0 astronomical camera
Celestron Skyris 132M にも： 取扱説明書 (17 ページ)
ページを印刷する
3.
Click Install Driver. The Driver
Installation Wizard will appear
and prompt you to connect
your camera.
4.
Plug the Skyris camera into
the computer's USB port
using the included cable. If
equipped, use a USB 3.0
port. The Driver Installation
Wizard will automatically
detect your Skyris model.
Click Next and proceed
through the prompts until the
driver installation is complete.
Skyris will also operate in USB 2.0 at a reduced frame rate.
4
SOFTWARE INSTALLATION
1.
Click Install iCap and follow the prompts to complete installation.
Click Install RegiStax and follow the prompts to complete installation.
2.
CONNECTING THE CAMERA
TO A TELESCOPE
1.
Remove the dust cap on
the camera body and thread
the 1.25" nosepiece to the
camera body. The threaded
ring on the camera body
should still be attached.
2.
Insert the camera into the
1.25" eyepiece holder on your
telescope. The camera body
can also attach to a camera
adapter with C-threads,
typically requiring the use of a
T-to-C adapter.
Optional T-to-C adapter (not included)
1.25" visual back
1.25" nosepiece
5