- ページ 6

デジタルカメラ Celestron Skyris 132MのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Celestron Skyris 132M 17 ページ。 Usb 3.0 astronomical camera
Celestron Skyris 132M にも：取扱説明書 (9 ページ)

ページを印刷する

CAPTURING IMAGES

Detailed Solar System images are created by stacking several individual images

or "frames" to one master image. The images are captured in video, allowing you

to accumulate hundreds of frames in just a few seconds. The video fi les will later

be exported to RegiStax and processed as shown in "Processing Images. "

Set up your telescope and point it at a bright target such as the Moon or

Jupiter. Center the target in your eyepiece, then remove the eyepiece.

Remove the diagonal if you are using one. Some refractor telescopes may

require an extension tube when used without the diagonal.

Plug the camera into your computer's USB port. If

equipped, use the USB 3.0 port on your computer,

which may also bear the USB SuperSpeed logo

(see right). When connecting the cable to Skyris,

use the threaded fasteners to provide the most

secure connection.

Insert the camera into the 1.25" eyepiece holder on your telescope as

shown previously in this manual, "Connecting the Camera to a Telescope. "

Locate the iCap shortcut on your desktop and open iCap.