- ページ 6

デジタルカメラ Celestron VistaPix 72204のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Celestron VistaPix 72204 15 ページ。 Binocular & digital camera
Celestron VistaPix 72204 にも：ユーザーマニュアル (14 ページ)

ページを印刷する

Operation Instruction

Continuous Shoot Mode

1.Press the Function button to select"

2.Press and hold the Shutter button within 5 seconds.

Notes: Under the continuous shooting mode, the photos are

all taken in QVGA mode and can be downloaded individually.

Taking 3 Photos Continuously

1.Press the Function button to select"

2.Hold down Shutter button within 5 seconds and it will take 3

photos continuously. And saved as jpg format.

Delete All Photos

1.Press the Function button to select the"

the LCD.

2.Press the Shutter button the LCD will flash. Press the

Shutter Button again within 5 seconds to delete all the

photos stored in the memory.

Delete Single Photos

1.Press the Function button to select the"

the LCD.

2.Press the Shutter button once within 5 seconds to delete

the last photo.

Photo Resolution Selection

The resolution status will always show on the LCD display in

small character.

1.Press Function button to select"Mode" character shown on

LCD;

2." Hi" means VGA mode 640*480 pixels," Lo" means QVGA

mode 320*240 pixels;

3.When you select Mode function, press the shutter button

once to switch between the Hi mode and the Lo mode.

Image Compression / Processing Mode Shift:

1.Press Function button to select the icon

2.Press the shutter button within 5 seconds to shift between

Compression(Hd) and ordinary mode(Ld).

Fluorescent Lamp Frequency Selection

1.Press the Function button to select the" 60" icon shown on

the LCD.

2.Press the Shutter button within 5 seconds to switch the icon

"60" to" 50" .

Tips:" 60" means you are in 60HZ; If you press shutter button,

you will switch to 50HZ. Generally speaking, there is 60Hz

fluorescent lamp frequency used in United States, Asia. And

50Hz used in Japan and Europe.

"shown on the LCD.

"icon shown on

shown on LCD.