- ページ 2

プールフィルター Hidrotermal HT-VS1200のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Hidrotermal HT-VS1200 7 ページ。 Fiberglass filter

ページを印刷する
Hidrotermal HT-VS1200 ユーザーマニュアル
Fiberglass Filter Parameters
Filter Area
Model
2
(m
)
HT-VS525
0.22
HT-VS625
0.30
HT-VS700
0.40
HT-VS700B
0.40
HT-VS750
0.45
HT-VS800
0.50
HT-VS900
0.64
HT-VS1000
0.79
HT-VS1100
0.96
HT-VS1200
1.13
Function
The filter uses special filter sand to remove dirt particles from pool water. The filter sand is loaded into the
filter tank and functions as the permanent dirt removing media. When the control valve is in the FILTER
position, the pool water which contains suspended dirt particles, is pumped through the piping system and is
automatically directed by the filter control valve to the top of the filter tank. As the pool water is pumped
through the filter, dirt particles are rapped by the sand bed, and filtered out. The cleaned Pool water is
returned from the bottom of the filter tank, through the control valve and back to the pool through the piping
system. This entire sequence is continuous and automatic and provides for total recirculation of pool water
through the filter and piping system.
After a period of time the accumulated dirt in the filter causes a resistance to the flow, making it to diminish.
This means it is time to clean your filter. With the control valve in the BACKWASH position, the water flow is
automatically reversed through the filter so that it is directed to the bottom of the tank, up through the sand,
flushing the previously trapped dirt and debris out the waste line. Once the filter is back-washed of dirt, set
control valve to the RINSE position and run the pump for about 1/2 to 1 minute, then resume to normal
filtering.
NOTE: Stop the pump before changing the valve position!
Please read and follow this MANUAL before install
and use the filter!
Max Flow
Valve
Connections
Rate (m
1.5"
50mm
12.00
1.5"
50mm
16.00
1.5"
50mm
20.00
2.0"
63mm
21.00
2.0"
63mm
23.00
2.0"
63mm
25.00
2.0"
63mm
31.00
2.0"
63mm
36.00
2.0"
63mm
42.00
2.0"
63mm
45.00
Figure 1
0.5-1.2mm
Size A
Sand Weight
3
(mm)
/h)
(kg)
85
40
150
45
210
50
215
52
300
58
355
64
470
65
620
70
800
72
900
73
Size B
Size C
Size D
(mm)
(mm)
(mm)
47
780
525
52
880
625
57
945
700
62
945
700
68
960
750
74
1080
800
75
1100
900
80
1285
1000
82
1380
1100
83
1500
1200