- ページ 9

農機具 AgriProTech AviTracのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AgriProTech AviTrac 15 ページ。 Solar panel option
AgriProTech AviTrac にも：ユーザーマニュアル (8 ページ)

2.b Installation of speaker for AviTrac® 18S

Make sure the speakers are stabilized on the top of the rear plate (above the central hole, Picture 8) and screw

the screw B2 to wing nut B3 as shown in the illustrations below (Picture 9 and 10). It is advised to make the

speaker cables point downwards in order to reduce the risk of water infiltration into the input sockets.

Picture 8. Holes for speaker on AviTrac® 18M

Picture 9. Speakers for AviTrac® 18M

Picture 10. Wing nut position and speaker screw

a. Top view, b. Bottom view

Once the speakers are mounted on the rear plate, the Y-

shaped cable can be connected to them (Picture 11 and

12).

Picture 11:

a. This connector has to be plugged into the side of the

box, in output socket n° 5 in the overall structure

diagram p.-4

b. and c. Each of these connectors has to be linked to a speaker cable.

Picture 11 Y-shaped cable

Picture 12 How to connect Y-shaped cable to your AviTrac®

– Tel: +33 (0)2 98 96 08 12 -