- ページ 7

ウォーター・ディスペンサー Hidrotermal MRS-4.5のPDF インストレーション＆メンテナンス・マニュアルをオンラインで閲覧またはダウンロードできます。Hidrotermal MRS-4.5 15 ページ。 Residential softener

※ For convenient maintenance, the device is suggested as the illustration shows.

Note: Install three ball valves to connect the control valve and inlet/outlet pipeline. Valve B is

connected with the inlet of the control valve, valve C to the outlet. When the valve body needs

fixing, open valve A, then close the valve B and valve C. Normally, just open valve B and C,

then close valve A.

※ The control valve should be placed higher than the floor drain. The sewage and overflow

pipelines should be less than 2 meter, and place them above the floor drain. No throttle

device should be installed on the drain line. The pipe sealing should be of PTFE only.

※ Each pipeline should be supported by an independent holder lest the weight and stress from

the pipeline cause damage to the control valve.

Note: Make sure drain pipeline and overflow pipeline are connected well andl closc to flow

drain which helps to drain rapidly.

8.3. Directions for Use

※ In the position switch of the multi-functional flow control valve, rotate the hand wheel or

handle by 360°clockwise or counterclockwise to make the pointer rotate to the responding

position so as to achieve the status of service, backwash, brine and slow rinse, brine refill

and fast rinse.

Notices:

The hand wheel or handle can only be rotated clockwise or counterclockwise, forbidden to

be rotated upward and downward.

In operation the hand wheel arrow must be pointed to the responding arrow, otherwise the

possible malposition will cause water channeling or insuffciency of flow rate.

English

Service

Backwash

Brine&Slow Rinse

Brine Refill

Fast Rinse

Graph

Means in service position

Means in backwash position

Means in brine & slow rinse position

Means in brine refill position

Means in fast rinse position

Meanings