- ページ 7

プロジェクターアクセサリー Celexon Expert XLのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Celexon Expert XL 9 ページ。

OPERATION

STEP 1: SECURITY CHECK & CONNECTION

The electrical connection of the screen must be carried out by qualifi ed

personnel according to the technical data (see above). Mount the wall switch

near the screen so that the user always has the screen in view when extending

and retracting it.

The cable must not be laid on hot surfaces or stretched. Never connect the wall

switch to more than one device. Disconnect the screen during maintenance

work.

STEP 2: EXTEND THE SCREEN (FIG. 2)

Press and hold the button marked with

the down arrow. The screen extends

and stops automatically at the set end

point. Make sure that no objects or

persons obstruct the extension of the

screen.

STEP 3: RETRACT THE SCREEN (FIG. 3)

Press and hold the button marked with

the up arrow. The screen retracts and

stops automatically at the housing or

the set upper end point. Make sure

that no objects or persons obstruct the

retraction.

STEP 4: STOP THE SCREEN

To stop the projection screen manually, release the pressed button - the screen

stops immediately.

It is possible to set the stop points. Please request the instructions for this procedure from

your specialist dealer or directly via www.celexon.com