FINISHING THE INSTALLATION
STANDARD CEILING MOUNTING
Step 1. Remove 1 of the 2 screws from the bottom of the hanger bracket and loosen the other one half a turn from the
screw head.
Step 2. Slide the canopy up towards the hunger bracket and place the key hole on the canopy over the screw on the
hanger bracket turn canopy until it locks in place at the narrow section of the key holes. (Fig. 16)
Step 3. Align the circular hole on canopy with the remaining hole on the hanger bracket, secure by tightening the
two set screws.
Note: Adjust the canopy screws as necessary until the canopy and canopy cover are snug.
Fig. 16
10