- ページ 7

ホワイトボード Celexon Electric ProfessionalのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Celexon Electric Professional 11 ページ。
Celexon Electric Professional にも：取扱説明書 (8 ページ)

ページを印刷する

MOUNTING ON THE WALL

Measure the distance between the ho-

les in the side caps (two per cap) and

transfer them to the wall.

Drill the holes at the markings with the

holes with the right diameter for the

mounting material and make sure that

the drill holes are absolutely level (Use

a spirit level!).

Use dowels and screws that are suitab-

le for your mounting surface. Screw the

two upper screws into the wall most

of the way and hang the screen from

both sides into the upper hole. Make

sure that the screen is installed straight

and level. Tighten the screws and then

tighten the lower screws on both sides

of the screen.

Caution:

not

overtighten

the

screws! If you notice cracks in the caps

they must be replaced! The screen

must not be used with cracked caps.

Please ensure that the metal shims are

also used for wall and ceiling mounting,

otherwise a safe installation cannot be

guaranteed).