- ページ 11
キッチン家電 Agrisan MH 8のPDF オーナーズマニュアルと取扱説明書をオンラインで閲覧またはダウンロードできます。Agrisan MH 8 15 ページ。 Hand mill
ページを印刷するProblems and Solutions
Problem
There is no
flour output
Metal shavings
in the flour
Cause
The crank cannot be
turned.
The knurled nut has not
been
correctly countered
(locked) or
has been turned too
tightly!
Smeared Mill stones
Should you see a white
ring
on the outer edge of the
mill stones that is a clear
sign that you have been
milling either
damp grain, been milling
too finely
or milling oily kernels (e.g.
linseeds).
Oily kernels stick between
the mill stones, make
them become so smeared,
that milling is no longer
possible.
The knurled nut was not
assembled correctly
Solution
This means that the mill
stones will be turned
tighter
and tighter together, so
that milling is no longer
possible.
Please see page 4.
Unfortunately you can
only feel your way through
processing
„damp grain".
The mill stones do,
however,
react very sensitively
towards dampness.
If you are not sure dry
the grain for half an
hour in your oven and
then let it cool
properly.
Please control if you
have assembled the
knurled nut
with the spigot facing
upwards
11