- ページ 7

ステレオシステム Celia & Perah M6のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Celia & Perah M6 16 ページ。 Wireless scalable hi-fi audio system

Getting started

Audio source inputs

You can connect the Main Speakers to your

optical, coaxial, 3.5 mm jack

You can connect the Main Speakers to your

USB, 3.5 mm jack, Bluetooth, Wi-Fi

You can connect the Main Speakers to your

Bluetooth, Wi-Fi, 3.5 mm input

You can connect the Main Speakers to your

following inputs: Optical, coaxial

You can connect the Main Speakers to other sources such as

the following inputs: 3.5 mm jack

Attention: to connect an audio source wirelessly, using Bluetooth or Wi-Fi, see pages 18 to 23.

using the following inputs:

smartphone

tablet

using the following inputs:

gaming console

Blu-ray player

turntable

CD player

Powering on

① Remove the battery insulation slip from the battery compartment of the remote control to

allow the remote control battery to supply power.

using the

② Point the remote control at the remote control receiving area on the front of the speaker and

press thePowerbutton: you will hear the system power-on tone.[LED display: boot animation

using

and preset audio source (BT)]

Attention:The next time you power on the system, the most recently used audio source will

be selected by default.

ON/OFF

Subwoofer and Zone 2 Speakers pairing (if any)

» Subwoofer/Zone 2 Speakers operation:

① Press and hold the CONN. button on the

Subwoofer until the LED indicator starts

blinking rapidly: the Subwoofer is now in the

C&P wireless connection pairing mode.

② Press and hold the CONN. button on the

Zone 2 Speakers until the LED indicator starts

blinking rapidly: the Zone 2 Speakers are now

in the C&P wireless connection pairing mode.

Setting up