- ページ 8

自転車 ADEN POWERKIT SPORTのPDF 取扱説明書および組立説明書をオンラインで閲覧またはダウンロードできます。ADEN POWERKIT SPORT 16 ページ。

POWERKIT SPORT- ASSEMBLY INSTRUCTION

ADEN GmbH

ASSEMBLY

A cable tie is used to finally center the drive ring

attached to the swing arm, place it on the ring and

check the concentricity of the ring.

The belt ring is brought into the correct position by pressing or

lightly tapping it with a blunt object. Check concentricity again

and again by turning the wheel.

Repeat the process until centering is as precise as possible.

(less than 1mm is sufficient)

Carefully tighten the first screws to prevent them from slipping.

Then screw in the remaining screws.

Tighten the T-key with 2 fingers (max. 1.5 Nm). Check all screws

again.

When mounting the motor, first hook in the lower rollers and then

the upper rollers. The groove of the upper rollers

hangs on the rail of the drive ring.

The lower rollers are then pushed upwards with a size 4 allen

slightly and tighten them firmly.

www.aden-sports.com

EN | S. 8