- ページ 5

浄水器 celitron TWE-12100のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。celitron TWE-12100 10 ページ。 Advanced water purifier system

Notes for use

1. Do NOT connect the system to hot water!

2. Do NOT freeze the system!

3. Do NOT tightly close the waste water drain hole, to prevent the braking of the RO film!

4. Insert RO film into the RO house before use!

5. Before the new system is used for the first time or the system hasn't made water for a long

time, first flush it for 10 minutes!

6. Under normal use the front filter core's needs to be replaced after 6 and 12 months of use,

but it also depends on the water inlet quantity and the quality of the used water.

Instructions for use

1. Place the RO system on it's spot. You can use the two pre-cutted hole ob the top of the

unit for hanging it up. Remember, that You have to change the filters later, so leave enough

space for that action between the three filter houses bottom and the ground ( approx. 40

mm).

2. Connect the unit's drain pipe to the drain. You can use to mount it on the drain line with

the special kit supplied.

3. Connect the unit's water inlet to the water supply system.

4. Connect the unit's power supply to the connector.

5. Using a screwdriver, set the unit's pressure to 6 bar by turning the screw on the water

pump's head. The pressure can be read from the indicator located in front of the unit on the

left side.

6. Connect the fresh water outlet to the desired spot.

RO manual version 1.0

Sting 11 B

CELITRON MEDICAL TECHNOLOGIES KFT