- ページ 7
産業機器 DBI SALA Flexiguard 8530607のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DBI SALA Flexiguard 8530607 16 ページ。 Safrig fall arrest system
WARNING:
This product is part of a Personal Fall Arrest and Work Positioning system. The user must follow the manufacturer's instructions
for each component of the system. These instructions must be provided to the user of this equipment. The user must read and understand
these instructions before using this equipment. Manufacturer's instructions must be followed for proper use and maintenance of this equipment.
Alterations or misuse of this product or failure to follow instructions may result in serious injury or death.
IMPORTANT:
If you have questions on the use, care, or suitability of this equipment for your application, contact Capital Safety. For general
questions, refer to national Standards including the ANSI Z359 (.0, .1, .2, .3, and .4) family of standards on fall protection, ANSI A10.32, and
applicable local, state, and federal (OSHA) requirements governing occupational safety for more information about fall protection systems.
IMPORTANT:
Prior to installation and use of this equipment, record the product identification information from the ID label in the
Inspection and Maintenance Log (Table 2) at the back of this manual.
PRODUCT DesCRIPTION:
Figure 1 illustrates the Flexiguard
Arrest System that rotates 360° on a Concrete-filled Counterweight Base (models 8530595 and 8530606) or Steel Outrigger
Base (models 8530579 and 8530607). The bases are configured to allow transport of the system with a Crane, Hoist, or Forklift
with a Sling Strap. A leveling Jack Kit for the concrete base is available. The SafRig Fall Arrest System includes an integrated
rescue capability.
Figure 2 illustrates components of the SafRig Fall Arrest System. See Table 1 for Component Specifications. The Boom (E)
extends from the Vertical Mast (D). A Self-Retracting Lifeline is be connected to the Boom for fall protection. The Vertical Mast
can be rotated 360° with the Rotation Handle (G) and locked at 11° increments or allowed to rotate through a range defined by
stop pins (see Figure 8). SafRig Fall Arrest System bases have Lifting Channels (H) for transport with a forklift, pallet jack, crane,
etc. The Concrete-filled Counterweight Base also includes Lifting Eyes (I) for use with a forklift or crane. A Slope Indicator (I) on
Concrete-filled Counterweight Bases can be used to determine if the system is level. Optional Leveling Jacks can be installed on
Concrete-filled Counterweight Bases.
Component Specifications:
Figure 2
Reference
Component
A
Hitch Ball Post
Concrete Filled Counterweight
B
Base
C
Steel Outrigger Base
D
Vertical Mast
E
Boom
F
Fall Arrest Connection Point
G
Rotation Handle
H
Lifting Channels
Lifting Eyes, Concrete Filled
I
Base
Slope Indicator, Concrete
J
Filled Base
K
i-Safe™ RFID Tag
Models 8530595 and 8530579 include SRL, Tagline and Caribiner, not shown.
System Specifications:
Capacity:
1 Person with a combined weight (including clothing, tools, etc.) of no more than 310 lbs (141 kg) or 420 lbs
(191 kg) with a 900 lb (408 kg) MAAF device.
Anchorage:
Structure supporting the Fall Arrest System must withstand a 7,350 lb (33 kN) vertical load.
SafRig Fall Arrest System. The SafRig Fall Arrest System is a fixed height boom mounted Fall
®
Table 1 – Specifications
Materials
Tube - Steel
Hitch Ball Pivot - Steel
Steel Shell, Concrete with Steel Rebar
Steel
Tube - Steel
Steel
Steel
Tube - Steel
Hand Grip - Rubber
Steel
Steel
Plastic Gauge on Aluminum C-Channel
Nylon, Glass
Filled with 4,000 psi Concrete
1,800 lb (8 kN) Vertical (â) Load
5,000 lb (2,268 kg) Vertical (â) Load
(1,250 lbs per eye)
Radio Frequency - 13.56 MHz
7
Rating