- ページ 10

アンプ Hifonics CYCLOPS 3KのPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。Hifonics CYCLOPS 3K 13 ページ。 Mt olympus

Hifonics CYCLOPS 3K 製品マニュアル
HfeQ - Hifonics eQ
18
The HFEQ is the perfect addition to any system.
The HFEQ is a ½ DIN ISO mount chassis which
means it needs a very narrow hole to be trimmed
into the dash. It can also be mounted under the
dash or center console. The key to successful
operation is "within reach" for quick adjustments to
the system when music style or sound changes.
The HFEQ is a 4 band EQ 4-band equalizer with +18dB variable amplitude on each band. The HFEQ also
features a 9 volt line driver which means you can drive many amplifiers without the need for an additional
line-driver.
Other features are Master volume and subwoofer volume control, Front to rear dual-amp fader, 2-audio
inputs with level matching. This means you can adjust the CD player and game console inputs so they don't
blow your ears out when you switch between them. The HFEQ also gives you Selectable 12dB high-pass
front / rear crossover, Selectable 12dB low-pass sub output and Selectable for mono or stereo outputs.
bxiPro 2.0 & bxiPro 1.0 - Digital bass enhancement Processors
If you just need to get a bit more control of the bass
frequencies,
the
BXiPro
Digital
Bass
Enchantment
Processors are perfect.
The BXiPRO processors contain a Bass Driver circuit that
accurately recreates and injects Low frequency information
back into the signal path. What that means in everyday terms
is that the BASS BOOSTER will give more bass impact to
the best or the worst of your digital or analog media.
The BXiPro 2.0 also features input noise reduction circuitry
and master volume on the unit plus illuminated controls
Hfxr - Hifonics electronic Crossover
If you have a multi-amplifier system and need more crossover
control than what is built into the amplifier, the HFXR is a
great solution for your system.
The HFX features can be set as a 2 channel or 4 channel
X-Over with 8.5 volt line driver.
featureS:
Direct sub-in receivers with sub-outs 0 - 12dB bass boost
»
at bass remote
Maximum pre-amp output: 8.5v RMS @ 45Hz bass boost
»
with quasi-parametric EQ
»
Selectable for mono or stereo woofers
180° phase-shift switch
»
Second order Butterworth front and rear channel
»
high-pass
Level adjustments for front, rear and sub channels
»
»
2-channel full-range RCA preamp Cascading output
19