- ページ 3

電動工具 ADENDORFF MCJ1000のPDF 組立・取扱説明書をオンラインで閲覧またはダウンロードできます。ADENDORFF MCJ1000 13 ページ。 Wood lathe 14 x 40 inch

Observe work area conditions. Do not use machines or power tools in damp or

wet locations. Don't expose to rain. Keep work area well lighted. Do not use

electrically powered tools in the presence of flammable gases or liquids.

Keep children away. Children must never be allowed in the work area. Do not let

them handle machines, tools, or extensions cords.

Store idle equipment. When not in use, tools must be stored in a dry location to inhibit

rust. Always lock up tools and keep out of reach of children.

10. Dress properly. Do not wear loose clothing or jewelry as they can be caught in

moving parts. Protective, electrically nonconductive clothes and nonskid footwear are

recommended when working. Wear restrictive hair covering to contain long hair.

11. Use eye and ear protection. Always wear ANSI approved impact safety goggles.

12. Keep guards and cover in place and in working order.

13. Avoid unintentional starting. Be sure the switch is in the Off position when not in use

and before plugging in. Do not carry any tool with your finger on the trigger, whether it

is plugged in or not.

14. Do not abuse the power cord. Do not yank compressor's cord to disconnect it from

the receptacle. Do not carry tools by the cord.

15. Remove adjusting keys and wrenches. Check that keys and adjusting wrenches

are removed from the tool or machine work surface before plugging it in.

16. Avoid unintentional starting. Be sure the switch is in the Off position when not in

use and before plugging in.

17. Do not overreach. Keep proper footing and balance at all times. Do not reach over

or across electrical cables or frames.

18. Maintain tools with care.

repaired by an authorized technician.

19. Outdoor extension cords. When the equipment is operated outdoors, use only

extension cords intended for outside use.

20. Stay alert. Watch what you are doing, use common sense. Do not operate any tool

when you are tired.

21. Replacement parts and accessories. When servicing, use only identical

replacement parts. Use of any other parts will avoid the warranty. Only use

accessories intended for use with this tool.

22. Check for damaged parts. Before using any tool, any part that appears damaged

should be carefully checked to determine that it will operate properly and perform its

intended function. Check for alignment and binding of moving parts; any broken parts

or mounting fixtures; and any other condition that may affect proper operation. Any

part that is damaged should be properly repaired or replaced by a qualified

technician. Do not use the tool if any switch does not turn On and Off properly.

Inspect tool cords periodically and, if damaged, have them