- ページ 6

パワーパック GALAXIS SHOWTECHNIK PYROTECのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。GALAXIS SHOWTECHNIK PYROTEC 8 ページ。 Pfm advanced
GALAXIS SHOWTECHNIK PYROTEC にも：ユーザーマニュアル (11 ページ)

ページを印刷する

You need to choose a frequency which allows nationwide use and which is exempt from any duties.

More information can be obtained from frequency coordinators, the authority who is in charge of

frequency allocation or the manufacturer. Even if the duty-free and nationwide usage of specific

frequencies is possible, you have to register as user at the FCC before operating the devices. Upon

your request we will provide the contact details of a competent frequency coordinator who will support

you in this process.

Alternatively you can apply for a license. In that case you will get a frequency assigned by a frequency

coordinator. The disadvantage of a license is that the usage of the assigned frequency is only allowed

in a certain region. You are allowed to use this frequency in a specific radius only. Every usage

outside of this radius demands an additional license, except you are using a nationwide frequency

(see above).

Attention: It is not allowed to operate two or more systems which are only differing in the programmed

RF channel in relative proximity (within radio range). In this case there is no safety in regard to

unintended firings. To safely operate two or more systems in relative proximity in addition either

different system IDs need to be assigned by the manufacturer or different system IDs need to be

assigned by the user.

5. Programming of the devices

To program your devices after finishing the script, click in the Composer "PFM Advanced" and "PFE

Advanced and G-Flame - Remote Access". You can either program the devices separately via

Normal- or High-Speed-Programming, or via batch programming with Normal- or High-Speed-

Programming. For the batch programming simply mark the devices you would like to program and

choose the relevant option. In the Log-List on the right side, you will be informed about the current

steps of the programming.

Note: More information about remote programming can be found in the manual of the PYROTEC

Composer.

6. Troubleshooting

If you encounter problems during programming or remote access, e. g. the message box 'Error during

programming', close the access tab in the Composer and disconnect the PFM Advanced from your

computer by simply unplugging the cable connection. Wait a few seconds and reconnect the PFM

Advanced. Now you can access the PFM Advanced again. If this does not work, close again all

access tabs in the Composer and the Composer itself and all other programs and restart your

computer.

If the error appears again or the connection becomes disrupted frequently, you need to check if the

driver is successfully installed. An incorrectly installed driver or driver conflicts lead to problems and

the function of the PFM Advanced can be impaired.

Note: To check if the driver is successfully installed, open the hardware manager and search for PFM

Advanced. You will see two drivers, one under 'USB' and the other under 'COM-Port'. Both are

correctly installed if no yellow exclamation mark is being displayed next to the device name. The entry

'PFM Advanced' under 'COM Port' should be deactivated to avoid access problems.

Note: If the error remains after checking the drivers and a potential reinstalling of the drivers, close all

running applications and restart your computer. This maintains that the previous installations become

effective.

- 6 -