- ページ 17

トリマー 909 20VLTGのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。909 20VLTG 20 ページ。 20v lithium ion cordless line trimmer

ページを印刷する

1. Changing a Line Spool

Using the protector

The trimmer is fitted with a

wire protector. To protect

small plants etc from the

rotating cutting line. The

protector limits how close the

head of the trimmer can go

to objects when the protector

is in the lower position. To

use the protector fold it down

so that its horizontal, this keeps the line a safe distance

from the end of the protector and helps prevent damage of

small plants and trees from the line.

Using as an edger

Note:

Always remove the battery pack from the trimmer

before carrying out any maintenance or making any

adjustments to the line trimmer.

The trimmer is capable of performing light edging tasks.

To fit edger wheels

Remove the clamping knobs

from the wheel assembly

and slide/clip the wheel

assembly on the lower

shaft. With the line trimmer

head set to the line trimmer

function, fit and clamp the

wheel assembly to the left

hand side of the guard.

1. Press the head pivot

button (12) and pivot the

head so it is at its lowest

setting. ie the guard

should be now parallel

and close to the shaft.

By standing the trimmer

on the wheels the cutter

is now set for edging.

Handle rotation while edging

The trimmer has a rotating handle which makes it easier to

edge while using the handle in an uprigt positon.

1. Loosen the edging shaft rotation lock (17) and simply

rotate the handle in a 90° clockwise position, then lock

into position.

Changing a line spool

Note:

Always remove the battery pack from the trimmer

before carrying out any maintenance or making any

adjustments to the line trimmer.

1. Turn the line trimmer upside down so you have direct

access to the spool.

2. Hold the bottom of the spool firm with one hand and with

the other hand squeeze the tabs on either side of the

spool cover and remove the cover.