- ページ 4

アクセサリー ADEO CONTROL SP-C4-1のPDF 設置および使用マニュアルをオンラインで閲覧またはダウンロードできます。ADEO CONTROL SP-C4-1 8 ページ。 Wifi super plug

Adeo Group s.r.l.

Via della Zarga n. 50 - 38015 LAVIS (TN)

Tel: +39 0461 248211 - Fax: +39 0461 245038

Mail: [email protected] – www.adeogroup.it

Installation requirements

Super Plug

requires the following requirements to work correctly:

● A wall socket in Schuko format

● IEEE 802.11 n / g / b 2.4GHz WIFI network (whose name and access key must be known) with DHCP

enabled

● At least one Android device (version 4.1 or higher) or IOS (version 9.0 or higher) with the free Adeo

Control App installed, even just for the installation phase

Download the

Android:

https://play.google.com/store/apps/details?id=it.adeogroup.superplug

Apple:

https://apps.apple.com/us/app/adeo-control-app/id1340429713

Make sure your smartphone is connected to the WIFI network where you want to install the

module

Press the + button on the bottom

Enter the password for your WIFI network

Press and hold the device configuration button for 6 seconds

Press Start Configuration

Wait a few seconds and enter a name for the device

Choose the type of device (between Super Plug or Super IO)

Press the Save and Close button

Device DVES will appear: DVES_XXXXXXXX, necessary for integration with Control4 (see

following pages)

For correct operation with the control devices that will be connected, it is recommended to associate a

static IP address to the device (instead of operating in DHCP). The device does not support static addressing

but you can apply the IP Reservation on your router (if supported).

During the procedure, which takes a few seconds, the LED of the plug flashes rapidly. In case of error, vice

versa, it is reported that no plug has been found; in this case, it is advisable to try again.

Adeo Control App

from

A d e o C o n t r o l è u n b r a n d d i A d e o G r o u p s . r . l .

Adeo Control

SP-C4-1

Device Manual

Rev. 3.0

Pag. Pag. 4 / 8