- ページ 7

マイクシステム Galaxy Audio HH64のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Galaxy Audio HH64 12 ページ。 Galaxy audio dht wireless microphone system
Galaxy Audio HH64 にも： ユーザーマニュアル (16 ページ)

ページを印刷する
Galaxy Audio HH64 ユーザーマニュアル
FREQ
GROUP
CHANNEL
SCAN
1
GROUP
CHANNEL
SCAN
FREQ
2
GROUP
CHANNEL
SCAN
FREQ
3
FREQ
GROUP
CHANNEL
SCAN
GROUP
CHANNEL
SCAN
FREQ
4
FREQ
GROUP
CHANNEL
SCAN
5
Handheld
Body Pack
Transmitter
Transmitter
1
2
3
Receiver Programming
Group and Channel Selection: Press and Hold the SET button. The
Group number will flash. Press
group, as shown on the left
press
or
to choose the appropriate channel, as shown on the left
For best results when operating multiple systems, set all systems to a
single group: then set each system to a unique channel within that group.
Receiver Volume Setting:
The receiver has an electronic volume control. When in the normal display,
press
or
to control the output volume (64 steps total) as
left.
Normal Display:
Volume and Frequency, as shown at left
LED columns to the left of the LCD display show RF & AF Levels.
Automatic Transmitter Setup:
Once the desired channel is set on the Receiver, you may allow the
Transmitter channel to be set automatically. Note: only one Transmitter
may used with each Receiver.
Turn on the Transmitter. Position the Transmitter IR window directly in front
of the Receiver IR window. The IR window of the MBP76 Body Pack is
located under the battery door while the IR window of the HH64 Handheld
is located at the bottom end of the mic body. Press the ASC Button on the
Receiver. The ASC Icon
will light when the synchronisation is complete. The Group and Channel
number of the Receiver should now be displayed in the Transmitter LCD.
With the HH64 turn on the transmitter after pressing the ASC button.
Note: The Transmitter must be within half a meter distance from
the Receiver during IR ASC automatic channel setting.
HH64 and MBP76 Transmitter Status Display
Battery Status:
Battery Status Indicators for both the Handheld and Body Pack
Transmitters feature Four Level Displays as shown in
Group and Channel Display:
After completing the ASC, both the Handheld and Body Pack Transmitters
will display the Group and Channel numbers selected as shown in
Normal Display:
Both Handheld and Body Pack Transmitters will display Group and
Channel numbers as well as Battery Status as shown in

System Setup

System Setup
or
to choose the appropriate frequency
1
; press (SET) again , (CHANNEL) flashes,
4
.
will flash in the Receiver LCD. The RF Meters
5
2
.
3
shown at
.
1
2
.
3
.
5