- ページ 13

送風機 909 KSBL26CCGのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。909 KSBL26CCG 15 ページ。 26cc full crank key start petrol blower

ページを印刷する

4. Install the spark plug finger tight in the cylinder head

then tighten it firmly with the spark plug wrench.

Air filter

The air filter should be checked approximately every

10 hours of use, or more frequently in dusty areas.

1. Unclip the filter cover on

the side, hinge around and

remove the cover and

filter element.

2. Inspect the element. If

the element is distorted or

damaged, replace it with a

new one.

3. Wash the filter in detergent

and water. Rinse the filter

thoroughly. Squeeze out

excess water. Allow it to dry

completely before reinstalling.

4. Install the element and cover

and then replace the cover

and clip into place.

Servicing

•

It is recommended once you first use your petrol blower

have it serviced after 15 hours of use.

•

Thereafter, service the petrol blower every 2 years.

Storage and maintenance after use

•

When you finish working, clean the petrol blower completely.

•

Inspect the entire blower and tubes for damage,

including loose or missing components, and repair

anything necessary.

•

Store the petrol blower away from direct sunlight.

•

Do not store in a nylon bag as this can encourage the

formation of mould.

•

Use a small brush to clean off the outside of the unit

and keep the air vents free from obstructions. Do not

use water or a hose to clean the unit.

Whenever the machine is not used for a long period of time,

proceed as follows:

•

Give the petrol blower an overall cleaning and a

thorough check.

•

Empty the fuel tank completely, then clean the

carburettor and lines by running the blower until it

stops from lack of fuel.

•

Protect all metal engine parts from corrosion by coating

them with oil.

•

Remove the spark plug, put several drops of oil into the

cylinder through the spark plug hole and then pull the

recoil starter 2 to 3 times in order to distribute the oil

evenly. Replace the spark plug and spark plug cover.

•

Clean the air filter as described in the air filter section.