- ページ 2

プロセッサー dbx Zone Pro 640のPDF マニュアルをオンラインで閲覧またはダウンロードできます。dbx Zone Pro 640 2 ページ。 Zonepro family multi-zone commercial audio processors
dbx Zone Pro 640 にも：マニュアル (2 ページ)

ページを印刷する

ZonePro

Digital Zone Processor

Analog Inputs:

Number of Inputs:

(6 Total) (2) Switchable line or mic

inputs, (4) RCA source

Connectors:

Euroblock (Line and Mic) RCA (Source)

Type:

Electronically balanced/RF filtered

Impedance:

> 50k

Balanced, >75k

Ω

Max input line level:

+20dBu Mic/Line, +12dBu RCA

CMRR:

> 40dB, typically >55db @ 1kHz

Mic Pre gain:

30 to 60dB

Mic EIN:

> 118dB, 22Hz-22kHz, 150

Mic Phantom Power:

15V

Analog Outputs:

Number of Outputs:

(4)

Connectors:

Euroblock

Type:

Electronically balanced, RF filtered

Impedance:

120

Ω

balanced, 60

Ω

unbalanced

Max Output Level:

+20dBu

A/D Performance:

Type:

dbx Type IV™ conversion system

Dynamic Range line:

>113 dB A-weighted, >110 dB unweighted

Type IV dynamic range:

>119 dB, A-weighted, 22kHz BW>117

dB, unweighted, 22kHz BW

dbx engineers are constantly working to improve the quality of our products. Specifications are, therefore subject to change without notice.

Architects' and Engineers' Specifications:

The device shall provide two balanced inputs that are selectable as line or mic level with phantom power; additionally there shall be eight mono-summing RCA line inputs,

and one S/PDIF input. The line inputs and output gains shall be controllable via software; the mic inputs shall be adjustable from the rear panel. Audio inputs and outputs

shall be accessible via rear panel RCA and Euroblock connectors.

The signal processing Graphic User Interface (GUI) software shall be user programmable using Windows®, 2000, and XP operating systems. Software control shall be via RS-

232 and Ethernet protocols and the DB-9 and RJ-45 connectors shall be located on the rear panel. The GUI shall provide display, configuration and control of all signal pro-

cessing functions including, but not limited to: • Input Gain • Highpass Filtering • Parametric Equalization • Compression • Limiting • Gating • Automatic Gain Control •

Ducking • De-Essing • AutoWarmth® • Advanced Feedback Suppression (AFS™) • Notch Filters • Signal Routing • Bandpass Filtering • Delay • Polarity

Front panel controls shall include output zone volume, source select, and muting for each zone and dynamic page selection for both page inputs (1260 only). A PC DB-9 con-

nector shall also be located on the front panel (1261 only). The front panel shall also include output level meters with a 6-segment LED meter and output dynamics threshold

LED (1260 only).

External control shall include scene selection, output level control and muting, and shall be via industry-standard CAT5 cable with RJ45 connectors. All program memory shall

be non-volatile providing program security should power or computer fail.

Audio conversion shall be 24-bit 48 kHz. The dynamic range of the processor shall not be lower than 110 dB A-weighted.

The device shall have an IEC power socket. The unit shall meet UL/CSA and CE safety requirements. The unit shall be constructed of cold-rolled steel with a brushed and

anodized aluminum front panel, and mount into a standard 19" 1U EIA rack. The device shall be a dbx ZonePro 1260 or 1261.

The Professional's Choice In Signal Processing

640/641

™

Unbalanced

Ω

Sample Rate:

48kHz

D/A Performance:

Dynamic Range:

112 dB A-weighted, 109dB unweighted

System Performance:

Dynamic Range:

>109 dB A-weighted, >106dB unweighted,

THD+N:

0.003% typical at +4dBu, 1kHz, 0dB gain

Frequency Response:

20Hz – 20kHz, +/- 0.5dB

Interchannel Crosstalk:

>80dB typical

Crosstalk input to output:

>80dB

Propagation Delay

0.6 msec

Operating voltage:

100 VAC, 50/60Hz, 120 VAC,

60Hz,230VAC 50/60Hz

Power Requirements:

29 Watts

Physical:

Weight:

6.8 lbs.(3.1 kg) Shipping weight 8.8 lbs.

(4.0 kg)

Dimensions:

1.75" H x 5.75" D x 19" W

Safety Agency Certifications:

UL 60065, IEC 60065, E 60065, EN 55013

FOR MORE INFORMATION CONTACT:

[email protected] - http://www.dbxpro.com

™

dbx Professional Products

8760 S. Sandy Pkwy. Sandy, Utah 84070

Phone (801) 568-7660, Fax (801) 568-7662