- ページ 7
計測機器 Autonics PSAN-LC01CPV SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Autonics PSAN-LC01CPV Series 13 ページ。 Small size, 1/2,000 resolution connector type digital pressure sensor
Autonics PSAN-LC01CPV Series にも： マニュアル (2 ページ)
ページを印刷する
PSAN Series
Analog voltage output type
(PSAN-
1V scale setting
※ 1
Press
Key
※ 2
5V scale setting
Press
Key
Key Lock
Press
Key
※ When pressing
key for 3 sec. in the middle of parameter setting, current setting value will be saved in EEPROM and it will be
returned to RUN mode.
※ All settings are saved in EEPROM regardless of power failure. Make sure that EEPROM has a limited write life cycle(100,000 times).
Preset setting
Hysteresis mode [ HYsM
Press
Key
Press
Key for
3 sec in RUN mode.
※
setting range : Min. display pressure ＜
※
setting range : Min. display pressure＜
※
setting range : Min. display pressure＜
※
setting range : Min. display pressure＜
E-10
Analog current output type
V-
)
(PSAN-
※ 1
Press
※ 2
Press
※ 1:
(voltage output)/
Press
or
key to set analog output scale value for 1V and 4mA.
Setting range: Min.rated pressure ≤
(Press
key for 1 sec to save selected pressure value as a scale value for 1V and 4mA and move to
next mode.)
※ 2:
(voltage output)/
Press
,
Key to set analog output scale value for 5V and 20mA.
Setting range:
(Press
key for 1 sec to save selected pressure value as a scale value for 5V and 20mA and move to
next mode.)
※ 3:
and previously set control function will flash in turn every 0.5 sec. Press
external function.(Press
● Select external input function
will flash in turn with previous setting parameter. Press
(Press
key for 1 sec. to save selected lock setting. Then, it will be returned to pressure unit setting mode.)
HYsM ]
Press
Key
and previously
set value will flash
in turn every 0.5 sec.
Press
or
Key
Press
to select
to select
setting value.
setting value.
≤ Max. display pressure
≤ Max. display pressure
A-
)
※ 3
4mA scale setting
Key
20mA scale setting
Key
(current output)and previously set pressure value will flash in turn every 0.5 sec.
,
(current output) and previously set pressure value will flash in turn every 0.5 sec.
,
+10% of rated pressure ≤
key for 1 sec to save selected function and move to next mode.)
● Select the control output for Auto shift function
Press
Key
and previously
set value will flash
set value will flash
in turn every 0.5 sec.
in turn every 0.5 sec.
or
key
Press
to select
setting value.
≤
≤
Hold/Auto shift input type
(PSAN-
Select external input function
Press
Key
Select the control output for
Auto shift function
Press
Key
≤ 90% of rated pressure
,
≤ Max. rated pressure
,
key to select key lock setting.
Press
Key
and previously
set value will flash
in turn every 0.5 sec.
or
key
Press
or
to select
setting value.
※ Refer to E-12 page.
H-
)
,
key to select
Press
Key
RUN mode
and previously
key