- ページ 13

アンプ Galaxy Audio G-440のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Galaxy Audio G-440 16 ページ。 G-series amplifiers

CONNECTION CABLES

The following diagrams show the wiring of the connectors that can be used with G-Series

amplifiers. To connect the mixer outputs to the amplifiers inputs, make certain to always use

balanced signal cables: the use of unbalanced cables could cause annoying hum and noise. To

connect the amplifier to the loudspeaker enclosures always use stranded twisted pair cables. For

8 ohm loads use 18 gauge or larger cables, and for 4ohm loads use 14 gauge or larger. Keep runs

as short as possible and use the largest gauge possible.

Take care of your connector cables, always gripping them by the plugs and avoid pulling them

directly. Always you're your cables carefully to avoid knots, kinks, and tight bends. Periodically

check that your cables are in good condition, correctly wired and with clean contacts. The majority

of audio problems are caused by the use of unsuitable or damaged cables.

Balanced 1/4" TRS signal connector

Balanced XLR-M signal connector

Twist-Lock signal connector